Water Resistant PVA Wood Glue


Can withstand up to four days water immersion

A specially formulated water-based adhesive for both interior and exterior applications where resistance to water is required. It forms a water-resistant bond permanently in 24 hours curing. Non-flammable, non-hazardous, clear-drying, sandable, paintable and low in Volatile Organic Compound (LEED compliant).

STIKWEL Water-Resistant PVA Wood Glue develops high bond strength and is excellent for bonding solid wood, decorative laminates, plyboard, particle board, veneer of hardwood, plywood, MDF and similar substrates. Highly recommended for kitchen cabinet making, door/window jamb fabrication, hard wood furniture joinery for both interior and exterior areas where water intrusion is expected. Also good for Parquet Flooring installation in flood prone areas. 

Trusted by woodworkers, carpenters and hobbyists for their wood-working projects. It offers the benefits of an easy-to use, water-based adhesive, with the holding strength STIKWEL is known for. The bond can withstand up to four days water immersion without delaminating.

Application procedure:

Wood surfaces are prepared prior to application of glue. Surfaces must be smooth, clean and dry. Joints should fit snugly. In general, applying a generous amount of glue on just one of the surfaces is sufficient. However, for hard-to- glue wood, it is advisable to apply the glue on both surfaces. Rub together the glued wood members in order to distribute the glue evenly on both surfaces before clamping or nailing together.

For clamping - apply enough pressure that can cause a fine bead of excess glue to squeeze out when proper pressure is applied. Do not apply too much pressure though.

Clamping Time - 1 to 2 hours
Working Time – 4 to 5 hours at the earliest
Curing Time – Permanent bond in 24 hours

Best for Kitchen Cabinet and Outdoor Furniture
Available in 1 kg and 500 gms

For inquiries or samples, please click here.